Inzpired Creationz

New Blog for a Friend

2012-02-13T07:19:00.000-05:00

Hey all i just wanted everyone that knows chacha
to go over and follow her! i made her a blog and she is soo
excited , but it will take her some getting use to.. so go say
a friendly hello please!! thanks everyone!!

Chacha's Site

~CT Call~

2012-02-07T03:49:00.001-05:00

I'm Looking to Fill 3 CT postion's

to make Tutorials from my kits!!

you will be asked to write 2 tutorials monthly

and once you request the kit , you will have one

week to TUT it and link to me , groups and

forums!! i'm not asking for much , other than

a little advertising of my kits...and a creative

team that rocks!! and can PIMP out my kits!!

To Apply for my CT , send me an email to:

glamdivadesignz@yahoo.com

Subject: CT postion

in your email tell me why you think you would

be right for my Creative Team , send me the link

to your website of current tutorials and please

let me know which forums you belong too!!

Thanks for your time and Good Luck!!

Sneek Peek "Citylicious"

2012-02-06T18:04:00.000-05:00

this is my new kit and its a collab with

SkyScraps and Bibi's Collection

Will be ready and in store by

the end of the week!!

xo- Nicky

New PTU/PU Scrapkit ~ Perky Valentine ~

2012-02-05T00:18:00.000-05:00

Hey all just finished another scrapkit..

its called "Perky Valentine"

here's the preview!!

You can get it HERE

thanks for looking!!

xo-Nicky

Tag Show Off!!!!

2012-02-02T09:34:00.000-05:00

Awesome Tags with my New kit Heartbreaker!!

And....

a tutorial!!

you can find it HERE

Tag Show Off!!!!

2012-02-01T05:36:00.001-05:00

made this from my new kit

"Heartbreaker"

you can check it out HERE

Scrapkit Previews 1/13/12

2012-01-31T11:49:00.000-05:00

Hey all !!

I have some previews to show you....

this will be hitting Scraps and the City Store this week!!!

Heartbreaker

Wicked Valentine

S.W.A.K.

Sultry Nights

~Sneek Peek~ PTU/Scrapkit "Sultry Nights"

2012-01-10T22:10:00.005-05:00

this is a teaser of my new and upcoming

scrapkit called "Sultry Nights"

goes perfectly with Sky Scraps

new tube "Luna"

This is Hitting

Scraps and The City Store

very soon....

but , before it does im holding

a contest @ SATC Forum!!!

So if you belong to

the forum and are a active

member then...

get over there and check it out!!

if not then come
join us in all

the fun challenges

and contest we have

to offer!!

xo-Nicky

Creative Chick Of the Month

2012-01-07T04:02:00.006-05:00

I'm The Creative Chick

of the Month

at Creative Chick's Forum!!!

first i wanna say thanks

to all of the managment...

you ladies rock!!

and to all my friends ,

thank you for all my wonderful Prezzie'z!!

Ok so here is my TAG SHOWOFF

of my prezzie'z so far....

From Ruth a.k.a.Chilly

From Kandi

From Tee

From Skia

From Tee

From Audrey

From Ruth

From Chacha

From Sharon

from Kelly

I will add more as i get them...

and thank you again everyone!!

xo-Nicky

Check This Out!

2011-12-31T20:25:00.000-05:00

Hey all , just added a New Challenge at Scraps and the City Forum!!

If your a Member , then get your butt over there and check it out!!

The Rest of you come check out our Awesome Forum!!

we have challenge to win great prizes , we have forum commisions

and its just a great place to hang out!!!

you can find us HERE

or click the blinkie to your right!!!

Happy New Year!!

xo-Nicky

"Party Rock" FTU/PU Scrapkit

2011-12-26T17:05:00.001-05:00

I Have a lil Scrap for everyone to play with....

just in time for the New Year!!

it's New Year Themed and Ready

for to make Fabby Tagz with!!

Previews Below....Happy Scrappin!!!

Enjoy!
Happy New Year!!!

Download HERE

xo-Nicky

Merry Christmas!!

2011-12-23T22:35:00.002-05:00

Hey all my dear friends!! Just want to wish you a safe and happy holiday!!

and i hope each and everyone of you the best in the new year to come!!

Merry Christmas!!

xo-Nicky

Gingerbread Kissez

2011-12-14T00:05:00.004-05:00

This tutorial was written and intended

for those who have some working knowledge of PSP

Supplies needed:

No Scrap Needed

Tube of choice

I used the artwork of the very talented

Sky Scraps you have to purchase a license to use her artwork

you can do that HERE

thanks Marie!!

Template: Temp40 by Kandi Kissez

you can download HERE
thank you Kandi!!!
please remember to leave
some love if you download!!

Mask: AR315_CMC-mask162 by Aqua

you can download it HERE
thank you Aqua!!
and dont forget to leave that thank you!!

Plug-ins:
VM natural/sparkle
Alienskin/impact/gradient glow & glass

dsbflux/bright noise

Juxe De Lignes/enterlacement
Xenofex/Constellation
Greg's Factory Output/Sine BlobsI
Mehdi/Weaver
Penta/Color dot

Let's Get Started!!

have your template and tube ready!!

open your template

shift + D to duplicate

close the org

delete the credits

image canvas size

750x750

i like a large working canvas

click on the large frame back

selections/select all/float/defloat/invert

grab your closeup tube and fill

this area with pieces of your tube

merge them down until you have one layer

then effects/plugins/penta/color dot

with these settings:

on the wordart

colorize with

hue at 0 and saturation at 110

effects/plugins/juex de lignes/enterlacement

with these settings:

and then go to effects/edge effects/enhance more

now it should be a very light striped cream color

now add alien skin gradient glow

with these settings:

then add alien skin glass

with these settings:

now go to adjust brightness/contrast

B15 C15 and then

add a drop shadow

V-2 H-2 Opacity50 blur 5

color a light pinkish in between

the cream and the burgandy of the tube

i just did pink

then i changed it to V2 H2 with black

now add VM natural Sparkle

with these settings:

now on the large frame colorize it

but go up a little bit into the orange

so that it gives off a cream look

now click on the circle frame

colorize them to a light pink

and add dsb flux

with these settings:

then add the same gradient glow

now on the small circle

which is below the circle frames

change this to a burgandy color

from your tube and add juxe de lignes again

now click on the left brown rectangle

and merge the right one down so they are one

apply greg's factory output sines blob 1

with these settings:

selections/select all/float/defloat

add a new raster layer and flood fill

with a gradient made from 2 colors

from your tube

gradient should be set on sunburst

repeats 6 invert unchecked

center point H100 rest all 0

then change the blend mode to screen

merge down/ add xenofex constellation

with these settings:

duplicate drop below and add

gaussian blur set on 5

ok click on left gradient and once again

merge the right with it

selections/select all/float defloat/invert

add you tube and postion to you liking/ delete

then go back to you tube before you copy

and mirror it before you paste the next one

and then postion it and hit delete

merge them together and set on

screen in the layers panel

then merge them down into the gradient layer

still having the selections going modify the

selection by 5 /invert/colorize H0 S110

add dsb flux again / and then gradient glow

select none / gradient glow again /sharpen

click on the right tan rectangle

merge it down with the left

go to effects/edge effects/enhance more

selections/select all/float/defloat/

modify the contract by 2/ new raster layer

flood fill with a burgandy color and then

effects/artist effects/halftone

with these settings:

then merge down select none

add the same gradient glow again

on the large circle

add the same dsb flux

and then effects/medhi/weaver

with these settings:

now go to the bottom layer

add a new raster layer

and with the same gradient

we have been using flood fill

and then add your mask

thats it , i hope you enjoyed my tutorial!!

add your copyright info, your name and your license

that's it!!!

i hope you enjoyed my tutorial!!

i would love to see anything you create

from any of my tutorials, please feel free to email me!!

glamdivadesignz@yahoo.com

This tutorial was written December 13th 2011

your finished tag is for personal use only

and can not be used for monetary gain.

Do not copy , upload to file sharing sites or claim as you own.

please if you want to share, then link back here.

give credit where credit is due!!

Any Resemblance to another tutorial is purely coincidental.

©InzpiredCreationz ~ Nicky ~2011

Holiday Memories

2011-12-13T23:50:00.004-05:00

This tutorial was written and intended

for those who have some working knowledge of PSP

Supplies needed:

Tube of choice

I used the artwork of the very talented

Sky Scraps you have to purchase a license to use her artwork

you can do that HERE

thanks Marie!!

Scrapkit:Christmas by SkyScraps

It is PTU and you can purchase it HERE
thanks Marie!!

Plug-ins:
Mura Meister's Copies

Let's Get Started!!

have your scrapkit and tube ready!!

open a new canvas
750x750
transparent checked

copy and paste

element 29 as a new layer

resize by 80% smart size

copy and paste

frame 9 as a new layer

resize by 98% smart size

dopy below the wreath

move it up just a little

bit so it looks like the

wreath is laying on top of it

copy and paste

frame 8 as a new layer

resize by 65% smart size

move to the right bottom corner

copy and paste

ribbon 3

make sure its on top

of everything else

move it down to the bottom of the

wreath and where it is just

above the candycanes on the other

frame , make the wood wreath active

selections/select all/float/defloat/invert

click back on the blue ribbon and grab

your eraser tool , eraser around the edges

of the wood frame and out from it

select none

now it should look like the blue ribbon

is wrapped around the 2 wreaths and

wrapped through the other frame on the

bottom right

now copy and paste

candy cane 2 as a new layer

resize by 55% smart size

move it below the blue ribbon

duplicate , mirror and rotate

to the left at 15 , single

layer checked merge down

and move the candy canes

below the blue ribbon layer

and center them in the middle

of the bow

copy and paste

poinsetta 4

resize by 55% smart size

effects/plugins/mura meisters copies

encircle with these settings:

now bring it a little

to the left and to the top

just where the red centers are

peeking out, refer to my tag

for placement

copy and paste

element 22 as a new layer

move to the bottom left

and drop below everything

now duplicate, mirror , flip

and mirror again bring it up to

the top center

copy and paste element 9

as a new layer , resize by

55% smart size and move it to the

bottom right

now add a few more elements

add a mask if you so chose

and your tube , copyright info and name

that's it!! i hope you enjoyed my tutorial!!

i would love to see anything you create

from any of my tutorials, please feel free to email me!!

glamdivadesignz@yahoo.com

This tutorial was written December 13th 2011

your finished tag is for personal use only

and can not be used for monetary gain.

Do not copy , upload to file sharing sites or claim as you own.

please if you want to share, then link back here.

give credit where credit is due!!

Any Resemblance to another tutorial is purely coincidental.

©InzpiredCreationz ~ Nicky ~2011

Cookies 4 Santa

2011-12-13T23:35:00.002-05:00

This tutorial was written and intended

for those who have some working knowledge of PSP

Supplies needed:

Tube of choice

I used the artwork of the very talented

Sky Scraps you have to purchase a license to use her artwork

you can do that HERE

thanks Marie!!

Scrapkit: Christmas Delight by SkyScraps

It is PTU and you can purchase it HERE
thanks marie!!

Let's Get Started!!

have your scrapkit and tube ready!!

open a new canvas

750x750
transparent checked
then floodfill with white

copy and paste

CD-E35 as a new layer

resize by 65% smart size

copy and paste

CD-E19 as a new layer

resize by 75% smart size

now grab the previous element

drop below this layer

and postion it to right underneath

where the light stick out inside

the wreath on the right side

now go back to the bottom layer

duplicate and bring it to the top

now lets make it look like

its wrapped aroun the wreath

over on the top left take

your free hand selection tool

go around the green bulb to the

red bulb in the center

selections/invert/delete

now it should look like it

was wrapped around up there

now add a slight drop shadow

on all 3 layers , close off your

background layer and then merge

these 3 layers visible

open background layer

copy and paste

CD-E44 as a new layer

resize by 50% smart size

move to the bottom right

make sure its above everything else

copy and paste

CD-E39 as a new layer

resize by 45% smart size

drop below the last element

and postion to look like

the cookie plate is sitting

in the bears lap

copy and paste

CD-E10 as a new layer

resize by 45% smart size

and then again at 50%

postion it to look like

its hooked on the top

of the glass of milk

copy and paste

CD-E37 as a new layer

now i believe i resized this by 65%

but i cant remember now

but play around with it and then

postion to the top left

but make sure its below the teddy bear

now add your main tube in the frame

duplicate it/drop below the orignal

gaussian blur 5 and then in the layer

panel set on lighten

now go back to the main tube again

duplicate and drop below the blur tube

and then go to effects/distortion effects

wind/from right /amount 100

now also before i did this i added

xero radiance to my main tube , but

i played around with it a little bit

but this is up to you , there is a quick

way of adding a little wow to your tube

and it is just duplicate your tube

set on screen and at 50% this will make

your tube come to life

ok now go to your other tube , if you are

using one like me and do all the steps

that we just did on the other one

except dont add the wind effect

ok thats it!!

just go around and add a drop shadow

to all elements and your tubes

and remember to add your license and copyright

and of course your name!!

i hope you enjoyed my tutorial!!

i would love to see anything you create

from any of my tutorials, please feel free to email me!!

glamdivadesignz@yahoo.com

This tutorial was written December 13th 2011

your finished tag is for personal use only

and can not be used for monetary gain.

Do not copy , upload to file sharing sites or claim as you own.

please if you want to share, then link back here.

give credit where credit is due!!

Any Resemblance to another tutorial is purely coincidental.

©InzpiredCreationz ~ Nicky ~2011

Forever

2011-11-21T10:43:00.004-05:00

This tutorial was written and intended

for those who have some working knowledge of PSP

Supplies needed:

Tube of choice

I used the artwork of the very talented

Sky Scraps you have to purchase a license to use her artwork

you can do that HERE

thanks Marie!!

Scrapkit "all the lovers" by skyscraps

you can find this beautiful PTU scrapkit HERE
thanks marie!!

FONT: Twilight New Moon HERE

Plug-ins:

VM natural/sparkle
(Alienskin/impact/gradient glow and glass)

(dsbflux/bright noise)

(optional/for text)

Let's Get Started!!

have your scrapkit and tube ready!!

open a new canvas 850x850

transparency checked

copy and paste E31 as a new layer

take your magic wand and click inside

the circles modify selections/expand by 8

copy and paste pp3 as a new layer

selections invert/delete

take your closeup copy and paste as new layer

postion in the top circle

now paste your closeup as a new image

then flip it, copy and paste it

as a new image on your canvas and postion

in the bottom circle

hit delete on this layer and the previous

select none

copy and paste E12 as a new layer

resize by 85% 3 times

move to the top right

and drop below all your layers

now take your free hand selection tool

and draw around the heart not going over the edge

copy and paste pp2 as a new layer resize by 85% 2 times

selections/invert/delete/select none

copy and paste your main tube

resize about 3 times by 85%

postion under the heart frame

now on your maine tube

selections/select all/float/defloat

grab your eraser tool , and click on the heart frame

erase the the top part so your tubes head it out from

underneath the frame select none

now take your freehand selection tool

make your main tube active again

and just draw around the bottom

sticking out below the heart frame and then hit delete

copy and paste E4 as a new layer

resize by 85% about 4 times

postion to the left bottom, refer to my tag

for placement

now write your text on this layer

i used a red from the scrapkit

then once you have it where you like it

change the blend mode in the layers

palette to overlay / merge down

then add

VM/natural/sparkle

now i did this on the default and

i did it about 3 times

once set on about 45 , then 25, then about 14

this will put the sparkle more on your layer and

they will be different sizes

now copy and paste E20 as a new layer

and postion it to look like the feathers are falling

down over the scroll

open E3, type out the text forever

rotate it while still having the text active

there is a little double arrow in the center of your text

so use this to rotate your text to fit in the big section

of the banner, then in the layers panel set on hard light

and merge down, copy and paste as a new layer

and postion over to the right , refer to my tag for placement

now add your VM sparkle again, aboue 3 times on different

sizes and what feels right to you

copy and paste E59 as a new layer

resize by 85% drop below everything

postion to the top left , duplicate

flip and mirror , merge down

duplicate again and go to guassian blur and set on 5

copy and paste E15-16 resize by 85% about 4 times

postion them to where you like them

merge them down so they are all one layer

add your sparkle again

now go around and add a nice
dropshadow with a heavy blur on it

on most of my items i used H0 V0 blur 10 Opacity 65

and on others H2 V-2 blur 5 opcity 50

this is up to you , you can add any dropshadow you like

now copy merged and paste as a new layer
drop below everything

and add guassian blur set on 5

add your name using the same font

i added DSB flux bright noise set on 40

then added a slight gradient glow to mine

then i added glass from alienskin impact as well

and then my dropshadow and then i sharpened it

now open the stars and copy and paste as a new layer

postion to the bottom right over your name
or where ever you put your name at..lol

add your copyright info and your license

crop your image and copy merged and save as a png.

that's it!!!

i hope you enjoyed my tutorial!!

i would love to see anything you create

from any of my tutorials, please feel free to email me!!

glamdivadesignz@yahoo.com

This tutorial was written November 21st 2011

your finished tag is for personal use only

and can not be used for monetary gain.

Do not copy , upload to file sharing sites or claim as you own.

please if you want to share then link back here.

give credit where credit is due!!

Any Resemblance to another tutorial is purely coincidental.

©InzpiredCreationz ~ Nicky ~2011

Paris Rendezvous

2011-11-15T22:44:00.002-05:00

This tutorial was written and intended

for those who have some working knowledge of PSP

Supplies needed:

Tube of choice

I used the art of the very talented

Sky Scraps you have to purchase a license to use her artwork

you can do that HERE

thanks Marie!!

this is a tutorial written without a scrapkit

but i have used some very awesome CU items instead

First CU item comes from Cajoline Scrap

Paris by Nite paper HERE
thank you so much for this
awesome freebie Cajoline!!

Second CU item comes from Scraps and Tubes

Pretty Papers HERE

thank you for this awesome freebie Zaza!!

Third CU item comes from Rieka Rafita
assorted flowers HERE
thank you for this awesome freebie Rieka!!

Masks & Wordart :

one is by babes and she has shut down her
site so for now i will include this in my supplies
009 i dont know whos mask this is , but if it is your please let me know

so that i can give proper credit!!
Wordart by me

all included in my supplies HERE

Plug-ins:

VM natural/sparkle
flaming pear/flood

(Alienskin/impact/gradient glow)
(dsbflux/bright noise)

(optional/for text)

Let's Get Started!!

open all your supplies

put your masks in your mask folder in psp

and have your tube ready...

open a new canvas 750x750

transparent checked

get cajoine_parisbynight_cu1

and resizeby 25% bicubic

all layers checked

copy and paste on your canvas

resize again by 85%

layers unchecked and do it

2 times..add mask 009

merge group

copy and paste

pretty papers 3 as a new layer

drop below your mask

resize by 85% and load your mask

copy and paste RR flower 4 as a new layer

you will need to resize this several times

but make sure each time is by 85% bicubic

postion to the left

\copy and paste RR flower 5 as a new layer

you will need to resize this several times

but make sure each time is by 85% bicubic

postion to the right

now add some sparkle on these to flowers

effects/plugins/VM natural/sparkle

with these settings:

no need to hit the randomize button each time

it will change on its own!!

grab your tube

copy and paste as a new layer

resize by 85% and postion to the left under the flower layer

and above the masks

( refer to my tag for example )

now change the tube to soft light in the layers panel

duplicate the tube change this one to screen

duplicate this one and drop it below the other 2

and go to adjust/blur/gaussian blur set on 5.00

now copy merged

and paste as a new layer

you will have to move it a little to the left to align it back up

now lets add the the waves

go to effects/plugins/filters unlimited/flood

with these settings:

now drop this layer below everything but your 2 masks

take your selections tool

and make a selection in the middle of the flowers

and up to the top and then hit delete

now add the wordart and postion it

over top the flowers and the tube

now go to your flowers and add a slight dropshadow

now take your freehand selection tool

and as you can see the flood has went

all over the bottom so we need to crop it some

so take the freehand and set it on 10 feather

go around the bottom and around the sides a little

make your selection a little wavy as well

then hit delete and it will be blurred and now you can save it

as a png without it looking like it was cut at the bottom

now add your name , artist watermark and your liscense

and copy merged and save as a png!!

That's it!! I hope you enjoyed my tutorial!!

i would love to see anything you create

from any of my tutorials, please feel free to email me!!

glamdivadesignz@yahoo.com

This tutorial was written November 15th 2011

your finished tag is for personal use only

and can not be used for monetary gain.

Do not copy , upload to file sharing sites or claim as you own.

please if you want to share then link back here.

give credit where credit is due!!

Any Resemblance to another tutorial is purely coincidental.©InzpiredCreationz ~ Nicky ~2011

Karma is a Bitch

2011-11-12T21:06:00.003-05:00

This tutorial was written and intended

for those who have some working knowledge of PSP

Supplies needed:

Tube of choice

I used the art of the very talented

Sky Scraps you have to purchase a license to use her artwork

you can do that HERE

thanks Marie!!

this is also a freebie tube and you can find it HERE

or if you would like more versions of it then

you will have to buy the pack from the store!!

Scrapkit PTU "Karma" by SkyScraps find it HERE

thanks Marie!!!

Mask and Font of Choice

Plug-ins:
Alienskin/impact/gradient glow

(optional/for text)

Let's Get Started!!

have your scrapkit and tube ready!!

new image

750x750

transparent unchecked

floodfill with white

copy and paste F-9 as a new layer

resize 85% bicubic 3 times

copy and paste f-4 as a new layer

resize by 85% 2 times

click inside your frame layer with

the stars....

selections/modify/expand by 5

copy and paste a paper of choice

next add your tube

postion to your liking

now add some elements of choice

you can refer to my tag if you like

now lets animate this!!

click the wordart circle

now duplicate it

click on your raster deform tool

move the little arrow down so that it

rotates...heres a way say you are looking at karma

somewhere on that circle so you want to rotate

it just past that karma so that the new layer

that you rotated looks like karma is right beside the one

beneath it.... now duplicate this layer

and rotate it again

you should now have a total of 3

sharpen the 2 layers you rotated

close them off so only the org is visible

now add mask of you choice

your name artist watermark and liscense number

crop the image with your selection tool to

the size you want

copy and paste it in animation shop

come back close off the wordart circle org

and go to the second one we animated and

make it visible copy merged and paste over

in animation shop

do the same thing with the next layer

save image as a gif.

That's it!! I hope you enjoyed my tutorial!!

i would love to see anything you create

from any of my tutorials, please feel free to email me!!

glamdivadesignz@yahoo.com

This tutorial was written November 12th 2011

your finished tag is for personal use only

and can not be used for monetary gain.

Do not copy , upload to file sharing sites or claim as you own.

please if you want to share then link back here.

give credit where credit is due!!

Any Resemblance to another tutorial is purely coincidental.

©InzpiredCreationz ~ Nicky ~2011

Spank Me

2011-11-07T11:46:00.002-05:00

This tutorial was written and intended

for those who have some working knowledge of PSP

Supplies needed:

Tube of choice:

I used the art of the very talented

Sky Scraps you have to purchase a license to use her artwork

you can do that HERE

thanks Marie!!

Scrapkit:
"All the Lovers" by SkyScraps find it HERE

thanks Marie!!!

Template:
by Melissa "sexilicious" Creative Misfits

5th set of masks down HERE

Mask:
Sparkle and Bling by Creative Misfits "Ella 1" HERE

Thanks to Melissa, Ella and The Creative Misfits

for the awesome freebies!!!

Plug-ins:

Alienskin/impact/gradient glow

Dsbflux/ bright noise

Zero/Radiance

(this is optional)

Let's Get Started!!

have your scrapkit and tube ready!!

open the template Shift + D to Duplicate

Close the original , Delete the Credits

resize all layers by 80%

Image /Canvas Size / 750 x 750

click on the 4 little dark grey squares

to make them active selections/select all/float/defloat/ invert

grab your main tube copy and paste as a new layer

postion over the 2 left squares/delete then

copy and paste again and postion over the 2 bottom

squares/delete/select none/merge down

delete the grey squares or close them off

click on the 2 have circles to make them active

selections/select all/float/defloat/modify contract by 2/invert

copy and paste pp1 as a new layer

resize by 85% bicubic/delete/select none

delete the half circles or close them off

click the white rectangle to make active

selections/select all/float/defloat/modify expand by 2/invert

copy and paste pp3 as a new layer

resize by 85%/delete/select none

delete the white rect. or close off

click the frame to make active

selections/select all/float/defloat/modify expand by 1/invert

copy and paste pp6 as a new layer

resize by 85% 3 times/delete/select none

delete the frame or close off

click on the little pink dots to make active

selections/seclect all/float/defloat/invert

copy and paste pp6 as a new layer

resize by 85%/delete

delete pink dots or close off

click back on the little squares with the closeup tube

add zero radiance with factory settings

selections select all /float/defloat/add new layer

pick 2 colors from your tube or scrapkit/gradient/foreground/background

fill the squares/drop below the squares/click back on the tube squares

effects/texture effects/blinds

width 2 /opacity 50/ both checked/color red or one you like

set on lighten in your layers panel and 50% opacity

merge down selections/select all/float/defloat/modify contract 4/invert

effects/plugins/dsbflux/bright noise/ 45 and lighter clicked

add a drop shadow V-2 H2 Opacity 50 Blur 2 color black

then add it again but change V2 H-2/adjust sharpen/select none

now click on your frame/

add dsb flux with the same settings but make sure mix is checked

then add a slight gradient glow with the red and black colors

now click on the little dots around the half circles

go to adjust/add noise/uniform 100% monochrome checked

add the drop shadow like we did befor but change to V1 and H1 Blur 1

and then swap them / sharpen

now copy and paste pp3 drop below everything

layers/load mask/fit to layer checked

then copy and paste E-59 and move it

down to the bottom and to the right

next copy and paste E-45 as a new layer

now lets add our main tube

postion it just on top of the frame layer

and bring it down where it meets the bottom so

it looks like she is coming out of the frame

add zero radiance to her as well

then duplicate drop below the tube

adjust/blur/gaussian blur/5

then in the layers panel set on lighten

click on the tube again to make it active

add a thick drop shadow to the left of her

make sure shadow on new layer is checked

drop it below the blur layer

now click on the half circles

selections/select all/float/defloat/modify contract by 5/invert

add dsbflux same settings but lighter checked

then add a slight gradient glow/sharpen/select none

then add the gradient glow again

duplicate/drop below and add glaussian blur

with the same settings as before

Now add some other elements of choice

add your name , license and copyright

Ok thats it!! i sure hope you enjoyed

this tutorial and get much use out of your

finished tag!!

i would love to see anything you create

from any of my tutorials, please feel free to email me!!

glamdivadesignz@yahoo.com

This tutorial was written November 7th 2011

your finished tag is for personal use only

and can not be used for monetary gain.

Do not copy , upload to file sharing sites or claim as you own.

please if you want to share then link back here.

give credit where credit is due!!

Any Resemblance to another tutorial is purely coincidental.

©InzpiredCreationz ~ Nicky ~2011

Glamorous

2011-11-05T15:44:00.003-04:00

This tutorial was written and intended

for those who have some working knowledge of PSP

Supplies needed:

Tube of choice

I used the art of the very talented

Celinart you have to purchase a license to use her artwork

you can do that HERE

thanks celine!!

( this is a exclusive tube to SATC and you can get her FREE with any $10 purchase!! )

Scrapkit "Starlight" by SkyScraps find it HERE

thank you Marie!!!

Font: Simply Glamorous

can be found @ Dafont

Mask: of choice

Plug-ins:

Alienskin/ Nature/water drops

alienskin/impact/gradient glow

Dsbflux/ bright noise

( for text )

this is optional

Let's Get Started!!

have your scrapkit and tube ready!!

open a new canvas

750x750

transparent checked

open e-16

copy and paste as a new image

resize by 85% about 2 times

open F-4

copy and paste as a new image

resize by 85% about 4 times

now make the first element active

take your magic wand and click inside

selections/modify/expand by 5/invert

copy and paste pp5

resize a couple time

drop below the element and hit delete

while you still have this inverted

add your tube

resize and postion to your liking

hit delete and select none

now close off all layers except for

the pp5 and your tube

change your tube to luminance legacy

and change to opacity set on 65%

now merge visible and copy merged

go to animation shop and paste as a new animation

now go to effects/insert image effect/scratches

with these settings:

when it finishes you will have a total of 7 ...

you need to go back to the first one and delete it

now select all/copy and paste back into PSP as a new image

all of your layers will be there

now on your canvas you should still have everything

closed off but your background and the tube

selections/select all

add a new layer

now go to your animation you have posted there in PSP

and grab the first layer copy and paste into the selection

now add another layer, go back to the animation

close off the layer you just copied and go to the next

copy and paste it into the selection...add a new layer

finish doing this until you have all 6 layers on your canvas

delete the first one you had merged and open your other layers back up

now go to the frame duplicate it and go to

adjust/brightness and contrast/ brightness 15 contrast 0

now duplicate this layer and add the brightness again

close off the 2 layers you just brightened leaving the org. visible

now copy and paste e-51 resize by 85% about 3 times

and move to the right of your tag

now copy and paste e-23 you will have to resize this one several times

postion it to the left in front of the champange bottle

now copy and paste e-20 resize by 85% about 3 times

take your magic wand and draw around the top of the

glass and then up in a sqiggly design and add a new layer

then add effect/plugins/alienskin/nature/water drops

with these setting:

now add 2 more layers and do this again on each layer

and just hit the random seed button one time on each

now add your main tube and some other elements of your

choice and you name , copyright info and some drop shadow

now start with you bubble on the glass

close off 2 of them

and the frame layer close off 2 of them

and start with your first layer of the animation

copy merged and paste into animation shop

go back and leave the bubbles

but change the animation and the frame layer

copy merged and paste into animation shop

go back close off the bubble layer and open the next one

and the next frame layer and animation layer

copy and paste into animationshop

continue doing this until you have all 6 layers in animation shop

changing the bubble layer every 2 frames after you paste into animation shop

so you should have 6 layers total , but really only 3 bubbles since there will be 2

of each in each set ...i hope that makes since!!

ok thats its just save as a gif.

we made it!! i sure hope you enjoyed

this tutorial and get much use out of your

finished tag!!

i would love to see anything you create

from any of my tutorials, please feel free to email me!!

glamdivadesignz@yahoo.com

This tutorial was written November 5th 2011

your finished tag is for personal use only

and can not be used for monetary gain.

Do not copy , upload to file sharing sites or claim as you own.

please if you want to share then link back here.

give credit where credit is due!!

Any Resemblance to another tutorial is purely coincidental.

©InzpiredCreationz ~ Nicky ~2011

Punk -N- Plaid Scrapkit

2011-10-28T09:31:00.002-04:00

Here is my FIRST Scrapkit

Yeah!!!!!!!!
I made this kit to match a new tube
i bought by Zlata_M called Lola!!
32 elements , 4 frames and 7 papers!!
its a freebie and i hope you will enjoy it!!
please let me know what you think
and if i should even try making more...lol
ok so anyways off to the kit!!

HERE

My Fortune

2011-10-20T15:32:00.003-04:00

This tutorial was written and intended

for those who have some working knowledge of PSP

Supplies needed:

Tube of choice

I used the art of the very talented

Sky Scraps you have to purchase a license to use her artwork

you can do that HERE
thanks marie!!

Scrapkit "Halloween Madnees" by Kittz find it HERE

thank you kittz for this awesome freebie!!!

My Supplies: HERE

Plug-ins:

Alienskin/ Impact/ Gradient Glow

Dsbflux/ bright noise

( for text )

this is optional

Let's Get Started!!

have your scrapkit and tube ready!!

open a new canvas

750x750

transparent checked

open the ghost frame

copy and paste as a new image

and resize resize by 95%

open the wordart circle

copy and paste and postion

under the ghost frame

refer to my tag for placement

next open my mirrorball

copy and paste and drop below

the ghost frame it should fit

after you postion it to the center

now make the ghost frame active

click inside with your magic wand

selections/modify/expand 5

new raster layer

set your color pallette in the

materials panel to 2 colors from the

scrapkit , i used the yellow and the purple

layers /new raster layer

effects/plugins/muras meister/cloud

with these settings

now add your tube under the mirrorball and

above the cloud layer....right in between

postion and resize to your liking

close it off..

add some elements of choice

i used spoooky lights as my mask

and i pulled it up to the left , duplicated

and then flipped and mirrored it

now add your name , copyright info

and your liscense

that's it!! i sure hope you enjoyed

this tutorial and get much use out of your

finished tag!!

i would love to see anything you create

from any of my tutorials, please feel free to email me!!

glamdivadesignz@yahoo.com

This tutorial was written October 20th 2011

your finished tag is for personal use only

and can not be used for monetary gain.

Do not copy , upload to file sharing sites or claim as you own.

please if you want to share then link back here.

give credit where credit is due!!
Any Resemblance to another tutorial is purely coincidental.

Trashy

2011-10-20T02:28:00.003-04:00

this tutorial was written and intended

for those who have some working knowledge of PSP

Supplies needed:

Tube of choice

im using the artwork of the very talented Sky Scraps

you must purchase a liscense to use her artwork

you can do that HERE

Thanks Marie!!

Scrapkit : PTU "trashy baby"

by Sky Scraps

you can find it HERE

thank you Marie for this wonderful kit!!!

Font: Simply Glamourous

mask: your choice

Plug-ins:

DSB/ bright noise

animation shop

these are optional

Let's Get Started!!

have your scrapkit and tube ready!!

open tb-f3 copy and paste as a new layer

resize by 85% 2 times and mirror it

postion to the left

colorize to match the pink in the kit

copy and paste your tube

resize to your liking

and postion in the center of the frame

next open tb-e52

copy and paste

resize to your liking

and postion to the right of the frame

open tb-e51

copy and paste

resize to your liking

drop below e-52 and i cut some of mine

off at the top , this is up to you

take you free hand selection tool

add shift selected and go around

the silver clips and only these

then slections invert and colorize

open tb-e14 copy and paste

and resize and move to the middle

of your frame and above it

next open tb-e25 copy and paste

and resize and move to the right

of the money stack

now open tb-e26 copy and paste

and resize and make it look

like it is setting on top of e-25

open tb-e23 copy and paste

resize and postion it in the

center of the 2 money elements

open tb-e32 copy and paste

resize and postion in front of

the lipstick and to the right

open tb-e27 copy and paste

resize and move it to the left

of the money stack

open tb-e28 copy and paste

resize and move it under the duck

to make it look like the duck

is setting on it , colorize

open tb-e24 copy and paste

resize and postion behind

the duck and the whip

rotate it about 10 to the left

open tb-e41 copy and paste

resize and drop it below the diary

like it is sticking out behind it

open tb-e42 copy and paste

resize and postion to the right

of the circle frame

click inside the frame

with your magic wand

selections/modify/expand/15

now you will have to grab the

free hand selection tool and go

out and over a little more in

some places to where it gets dark

because if not you will see where

you cut the paper so it has to

be selected in the dark part of the lace

open tb-pp1 copy and paste

resize and colorize

selections/invert/delete

now duplicate this 2 times

add dsbflux/bright noise/52

add this to the next layer and go

down to 51 and then 50

open tb-pp7 copy and paste

colorize and resize

add your mask

i added a little dsbflux here as well

go to your bow

outline the diamonds

with your freehand selection tool

duplicate it 2 times

add adjust/add-remove noise/add noise

set on 100 uniform and monochrome checked

go down on the other 2 layers

now go to the lipstick

select the lipstick and the silver trim

duplicate 2 times and add

dsbflux set on 52

and go down on the other 2

now on the tube i added some bling

you can do this to just by using the

freehand selection tool and outlining

the bright parts and then add dsbflux

but set on 29 and then of course you go down

now give the elements and the tube some

nice drop shadows

ok now add you name , copyright info and

your licesnse

copy merged and paste in

animation shop and save as a gif.

That's it!!

I hope you enjoyed my tutorial!!

I would love to see your finished tag!!

email: glamdivadesignz@yahoo.com

Thanks!!

This tutorial was written October 20th 2011

your finished tag is for personal use only

and can not be used for monetary gain.

Do not copy , upload to file sharing sites or claim as you own.

please if you want to share then link back here.

give credit where credit is due.

Any Resemblance to another tutorial is purely coincidental.

Starlight Forum Set

2011-10-19T20:17:00.012-04:00

this tutorial was written and intended

for those who have some working knowledge of PSP

Supplies needed:

My frames you can download HERE

not to be used in any other tutorial

Tube: my english bulldog

from the artwork of the very talented Sky Scraps

you must purchase a liscense to use her artwork

you can do that HERE

Thanks Marie!!

Scrapkit : PTU "Starlight"

by Sky Scraps

you can find it HERE

thank you Marie for this wonderful kit!!!

Animation: Glitterbug my Missy

you can find it HERE

thank you missy for this awesome freebie!!!

"remember to leave some love when you download!!"

Font: Weltron

Plug-ins:

DSB/ bright noise

Alien Skin /Gradient Glow

animation shop

these are optional

Let's Get Started!!

have your scrapkit and tube ready!!

open a new canvas 650x230

transparent checked

open your tube and resize by 85%

3 times and postion to the top

open starlight-F1 and resize by 85%

postion to the bottom and drop below the main tube

take your raster deform tube and just pull the sides to meet

the canvas on the left and right since it is just a little bit too small

after resizing , refer to my banner for postioning...

now on your tube add

effects/plugins/zero/radiance

on the factory settings

ok open pp4 and paste as a new layer , drop it below everything

and postion to see the city in the background

i moved mine to the left and then duplicate and moved it around

to get more of the city i liked...this is up to you , you can just use it once

adjust/sharpness/sharpen

ok next lets add some papers in the flim strip

click to make it active

and then take your magic wand and click in

the middle square and selections/modify/expand by 4

paste pp8 resize by 85% 4 times

postion to your liking

selections/invert/delete/select none

lets add some bling to it

effects/plugins/dsbflux/28

adust/sharpness/sharpen

now take your selection tool and select all the little squares

paste pp9 resize by 85% postion to your liking

selections/invert/delete

and add dsb flux again but change it to 50 and then sharpen

now click again to make the strip active

click in all of the squares except the middle one

now copy and paste e25 resize by 85% about 3 times

postion to the left so it will be in the 2 first frames

and the duplicate and postion to the right

refer to my banner as reference

selections/invert/delete on each of those layers

now add a little gradient glow to the film strip

with these settings

now lets add e64 you will have to resize this several times

and then postion behind your tube and the film strip

once you have it to the size you like and where you want it

duplicate it and then mirror it , it should look like its bursting

into the air behing your doggy!!

now add e65 and do the same thing...refer to my tag on postioning

ok now add e11 and resize it about 3 times

and postion it behind the hearts

and where it looks like its just peeping out

and then duplicate it ,mirror and

merge down add gradient glow

with the same settings and a nice drop shadow then sharpen

now add e39 drop below your tube and postion it

right on top of the film strip , then colorize it to a pink color you like

and then add the gradient glow and then repeat it again

now duplicate your tube , resize by 85% and drop below

everything but the main background paper and postion to the left

duplicate then mirror /merge down set opacity at 50

now add the sparkles that come with the scrapkit ,

color of your choice there is 4 of them

these should be right below you tube

ok now here comes the tricky part....the animation

stick with me and it will be totally worth it!!

just take a deep breath and relax ...this will be fun!!

ok so here is what i want you to do first ..this is a lot of work

but keep in mind its not as hard as it seems

close off all layers except the background paper , the mirrored tube

and the doubled star ,merge visible and copy merged and paste in animation shop

duplicate this until you have a total of 16 frames

now open glitterbug by missy and select all

propagate the paste and copy

now on the background layer select all /propagate the paste/paste into selected frame

postion to your liking ....now i did mine 2 times so it would fit all the way across

the background and have more animation and bling ..lol

this is up to you ...

ok now select all/ copy and paste as a new image back into paintshop pro

all of your frames should be there .. now here is the hard part

copy each one and paste into our working canvas as a new layer

still keep everything closed off but the background layer ....

after you paste all your frames

you can delete the one we merged earlier for the background

so you dont get confused when you are transfering

them back to the animation shop

now uncheck everything else...the frames you added should be underneath all of this

now go to your tube layer and add a drop shadow

with these settings

grab you selections tool , use these settings

click with you magic wand in the center and hit delete

new layer and flood fill with white and set to opacity to 35 drop it below the little black frame

on the black frame add gradient glow again with the same settings

now add your name i used weltron and then i added gradient glow ,

duplicated it and placed 2 on the strip...

then i merged it down and rotated it and but it on the bottom right

go to the top layer of everything and add my frame i made

now is the time to add you copyright and license numbers!!

ok now go down to the first layer of the animation background

copy merged and paste into animation shop

come back and close off that layer and copy merged the next one

paste in animation shop , continue doing this until you have all

16 layers in the animation shop and then save as a gif.

with 10 secs per frame.....

Now on to your avatar

this is pretty simple if you have made it this far...

all you have to do is take your selection tool

make a selection that you like from your banner

and copy merged and paste it

into a new image 150x150

with all 16 layers , if you want it animated

if not just save as a png....

thats it!!

whew we are done!!

glad you made it to the end!!

I hope you enjoyed my tutorial!!

I would love to see your finished tag!!

email: glamdivadesignz@yahoo.com

Thanks!!

This tutorial was written October 19th 2011

your finished tag is for personal use only

and can not be used for monetary gain.

Do not copy , upload to file sharing sites or claim as you own.

please if you want to share then link back here.

give credit where credit is due.

Any Resemblance to another tutorial is purely coincidental.

Crypt Creeper

2011-10-18T20:52:00.007-04:00

This tutorial was written and intended

for those who have some working knowledge of PSP

Supplies needed:

Tube of choice

i used the artwork of the very talented Sky Scraps

you must purchase a liscense to use her artwork

you can do that HERE

Thanks Marie!!

Scrapkit is "Hallow Candy" by Wicked Creation Scrapz

you can find it HERE

thank you Sue Ellen for this wonderful kit!!!

Mask is by Weescotlass

MASK WSL75 HERE

it is in the 60-120 collection

Plug-ins: DSB-Flux spiderweb and bright noise

Alien Skin /Gradient GLow

these are optional

Let's Get Started!!

have your scrapkit and tube ready!!

Image /Canvas Size / 750 x 750

i like a larger working area , and you can always resize later

open WCS-element14 copy and paste as a new image on

your canvas , resize by 85% smart size

take your magic wand and click inside the frame

selections/modify/expand by 5

add your closeup tube and hit invert/delete/invert

now click 2 colors from the frame and or the tube you will be using

my 2 colors are #d909a7 and #ffca26

then pick your gradient foreground-background with these settings

Angle 45 Repeats 5 style linear

add a new layer and flood fill with this gradient

now add another layer with this gradient but

go back and change the repeat to 4

and add one more layer and change the repeat again to 3

now you should have a total of 3 layers

Now add DSB Flux/Spider Web with these settings:

then adjust/brightness and contrast / B10 C10

then adjust/sharpness/sharpen

go to the next layer and repeat the spider web again

add dsb flux spider web and change the 10 to a 11

then the brightness with the same settings and sharpen

and on the third layer change the 11 to 12 and the brightness and

the sharpness as well

ok close off 2 of those layers so that only one is visible

now add some elements of choice

and your main tube and postion to your liking

if you use the casket with RIP on it

then click in the center with your magic wand

in the box area ...and your tube postion to your liking

and then selections/invert /delete

set on 20 in the layers panel

ok the mask i used i pp3 add the mask ,
merged the group and then moved it up to the left top corner
and then duplicated it , flipped and mirrored it

i did the same thing with pp1 just reversed

on my text i just add dsb flux
and then gradient glow on the factory default

but changed the color ....and a thick shadow was used...easy

add a slight drop shadow to all your elements and thats it

for the animation just copy and paste
with one of your spider layers unchecked
and the other 2 closed , copy merged paste in A.S.
and then come back close that one and open the next and so on..

now add your copyright info and your finished!!

That's It!!

I hope you enjoyed my tutorial!!

I would love to see your finished tag!!

email: inzpiredcreations@gmail.com

Thanks!!

This tutorial was written October 3rd 2011

your finished tag is for personal use only

and can not be used for monetary gain.

Do not copy , upload to file sharing sites or claim as you own.

please if you want to share then link back here.

give credit where credit is due.

Any Resemblance to another tutorial is purely coincidental.